Need help?Do you have a question about the Roland GP-8 and is the answer not in the manual?
General| Brand | Roland |
|---|---|
| Model | GP-8 |
| Category | Music Pedal |
| Language | English |
Essential safety guidelines for using the product.
Information regarding radio frequency interference and compliance.
Overview of buttons, dials, and displays on the front panel for operation and editing.
Details of all input/output jacks and connectors on the rear panel for connectivity.
Notes on power requirements, operating environment, cleaning, and cable care.
Guidelines for unit maintenance, battery replacement, service, and operational notes.
Highlights the main features like memory, MIDI, and controller support.
Explains patch storage, selection, and writing into memory.
Instructions for connecting the GP-8 to amplifiers, mixers, and other gear.
Details on connecting foot controllers like FC-100 and EV-5.
Guide on how to select stored effect programs (Patches).
Covers editing effect parameters, writing to memory, and renaming patches.
Explains how to use control and expression pedals for performance.
Details on controlling external gear and using line output jacks.
Lists and describes the parameters for the Dynamic Filter effect.
Details the parameters for the Compressor effect, including Attack and Sustain.
Explains the parameters for the Turbo Over Drive effect, such as Tone and Drive.
Details the parameters for the Distortion effect, including Tone and Distortion depth.
Describes the parameters for the Phaser effect, such as Rate, Depth, and Resonance.
Lists the parameters for the Equalizer effect, controlling High, Mid, Low, and Output levels.
Details the parameters for the Digital Delay effect, including Level, Time, and Feedback.
Explains the parameters for the Digital Chorus effect, such as Rate, Depth, and Pre-Delay.
Covers Master Volume adjustment and EV-5 expression pedal parameter selection.
Details on controlling external devices and naming patches.
Explains the MIDI IN, OUT, and THRU connectors and their functions.
Guide to configuring MIDI channel and OMNI reception mode.
Instructions for transferring patch data via MIDI Bulk Dump and Load.
How to change patches using MIDI Program Change messages.
Lists all built-in effects and details memory capacity and patch management.
Overview of panel switches, knobs, indicators, and rear panel connectors.
Technical electrical specifications for input, output, and effects.
Physical dimensions, weight, included accessories, and optional items.
A table to record settings for each effect parameter.
Space to record Master Volume and patch names.
Solutions for problems where no sound is heard from the unit.
Solutions for problems related to MIDI communication and foot controller operation.
Details on MIDI messages sent and received by the GP-8.
Describes transmitted Program Change and System Exclusive messages.
Lists the MIDI address mapping for various GP-8 parameters.
Outlines the sequence of messages during Bulk Dump operations.
Table showing factory preset patch settings for Group A.
Table showing factory preset patch settings for Group B.
Information on modifying IC35 connections for improved timing synchronization.
To Next Page
