Roland GP-8 User Manual

© IMPORTANT NOTES ©
@The appropriate power supply for this
unit is shown on its name plate. Please
make sure that the line voltage in your’
.country meets the requirement.
ӨБсісге setting up this unit with other
devices, turn this unit and all the other
units off.
ФИ the unit is not to be used for a long
period of time, unplug the cord from
the socket.
QG Operating this device near a neon or
fluorescent lamp тау cause noise
interference. If so, change the angle or
the position of the device.
@ Avoid using this device in extreme heat,
humidity or where it may be affected
by dust,
@ Please avoid placing or dropping anything
heavy on the power cable.
Q Use mild detergent for cleaning. Do not
use solvents such as thinner.
Ф The СР-8 features a memory back—up
system that retains the data even when
Switched off. The battery that supports
the back—up circuit should be replaced
every five years. Call Roland for the
battery replacement,(The first replacement
may be required before -five years,
depending on how much time had passed
before you purchased the device.)
Q To avoid accidental erasure or loss of
data, please record it in an external MIDI
device (MC—500) or make memo of the
effect programs. If it happens to be erased
while the device is being repaired, there
is no way of restoring it.
ФІ! is normal for this device to become
warm while it is being operated.
@Do not attempt to disassemble this unit
unless you are an authorized. Roland
Service Center.
QG About five seconds after the unit is
turned on, the muting circuit functions
therefore no effect sound is heard.

Roland GP-8 Specifications

General

Brand	Roland
Model	GP-8
Category	Music Pedal
Language	English