Roland GK-2A - User Manual

SYNTH VOL
DOWN/S1
UP/S2
MIX
GUITAR
SYNTH
Thank you for purchasing the Roland GK-2A divided pickup.
Before using this unit, carefully read the sections entitled:
• USING THE UNIT SAFELY (page 2–3)
• IMPORTANT NOTES (page 7)
These sections provide important information concerning the proper
operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of
every feature provided by your new unit, Owner’s manual should be read in
its entirety. The manual should be saved and kept on hand as a convenient
reference.
Owner’s Manual
Copyright © 2000 Roland CORPORATION
All rights reserved. No part of this publication may be reproduced in any form
without the written permission of Roland CORPORATION.

Roland GK-2A Specifications

General

Compatibility	Compatible with Roland guitar synthesizers
Output	13-pin DIN
Pickup Configuration	Hexaphonic
Controls	Volume
Power Supply	Powered by compatible Roland device
Mounting	Attaches to guitar body

Summary

USING THE UNIT SAFELY

Safety Warnings and Symbols

Details essential safety warnings, caution notices, and explanatory symbols for safe operation.

FEATURES

Product Overview and Capabilities

Introduces the GK-2A, its purpose as a guitar pickup and synthesizer controller, and its compatibility.

GK-2 A WARRANTY

Warranty Terms and Conditions

Outlines Roland's guarantee against defects and advice on service and potential damage.

PANEL DESCRIPTIONS

Pickup and Controller Components

Detailed descriptions of the Divided Pickup, Controller Unit, and their individual controls and connectors.

IMPORTANT NOTES

Sensitivity and Cable Management

Guidance on adjusting pickup sensitivity and proper cable routing to prevent strain and damage.

Power, Placement, and Maintenance Precautions

Instructions for power handling, optimal placement to avoid interference, and safe cleaning procedures.

Additional Operational Precautions

Advice on careful handling of controls, connectors, and safe transportation to prevent damage.

INSTALLATION

Installation Notes and Preparation

Pre-installation considerations, compatibility checks, and preparation steps for attaching the GK-2A to a guitar.

Included Parts and Accessories

Lists and illustrates all parts supplied with the GK-2A for installation and operation.

Attaching the Controller Unit with Holders

Step-by-step guide for mounting the Controller Unit using the provided holder hardware.

Attaching the Controller Unit with Tape;Screws

Instructions for securing the Controller Unit using double-sided tape or drilling pilot holes for screws.

Attaching the Divided Pickup with Tape

Detailed steps for positioning and attaching the Divided Pickup to the guitar using double-sided tape.

Divided Pickup Height Adjustment (Tape Method)

Guidance on using spacers and cushions to set the correct height for the Divided Pickup when using tape.

Attaching the Divided Pickup with Screws

Instructions for mounting the Divided Pickup using screws, including drilling and height adjustment.

OPERATION

Connecting the GK-2 A to the GR Unit

Step-by-step instructions for safely connecting the GK-2A to a Roland GR synthesizer using the C-13A/B cable.

SPECIFICATIONS

Technical Specifications and Dimensions

Lists the GK-2A's technical specifications, weight, dimensions, and included accessories.

Information

Service and Distributor Contact Information

Provides contact details for Roland Service Centers and authorized distributors worldwide for support.