To Next PageTo Next Page
Need help?Do you have a question about the Roland GP-16 and is the answer not in the manual?
General| Brand | Roland |
|---|---|
| Model | GP-16 |
| Category | Music Pedal |
| Language | English |
Details electrical properties like impedance, output levels, and load impedance.
Information on the unit's display and the frequency range for built-in effects.
Lists the various audio effects integrated into the processor.
Technical specifications for A/D, D/A converters, and sampling frequency.
Details on power consumption, supply, dimensions, weight, and accessories.
Lists various types and sizes of screws and hardware used in the unit.
Comprehensive list of all parts with their numbers and locations.
Important safety warnings and guidelines for ordering replacement parts.
List of parts related to the unit's chassis and panels.
List of knobs and buttons used on the unit.
Details of switches used in the GP-16.
List of input/output jacks and sockets.
List of integrated circuits with part numbers and functions.
Lists potentiometers and transistors used in the unit.
Lists diodes, LEDs, and photocouplers.
Lists resistors and capacitors by value and type.
Information on crystal oscillators and coils used.
Details about the power transformer and LCD unit.
Details on wiring harnesses and connectors.
Other miscellaneous components.
Data sheets for operational amplifier ICs.
Data sheets for the central processing unit IC.
Data sheets for ROM and RAM integrated circuits.
Data sheets for Analog-to-Digital and Digital-to-Analog converter ICs.
Data sheets for support ICs like regulators, filters, and comparators.
Important cautions and required equipment for test mode operation.
Procedures for entering and exiting the device's test mode.
Procedure to check the unit's battery status.
Step-by-step guide for initializing device data.
Procedure to check the Digital-to-Analog converter's output.
Procedure for checking the signal pass-through function.
Procedure to check the Analog-to-Digital converter's input.
Procedure to check the signal gain levels.
Continued procedure for checking signal gain levels.
Procedure to check MIDI input and output communication.
Procedure to check the RRC connection and function.
Procedure to check front panel keys and LEDs.
Initial steps for data operations involving power-on.
Procedure for initializing all patch data on the device.
Procedure for initializing the device's system data.
Details on transmitting and receiving data using bulk dump.
Steps for transmitting data from GP-16 to another device.
Steps for the transmitting GP-16 (GP-16T).
Steps for the receiving GP-16 (GP-16R).
Steps to complete data transfer and return to normal mode.
Steps for saving data to a MIDI sequencer (MC-500MK2).
Steps for the GP-16 in MIDI sequencer data transfer.
Steps for the MC-500MK2 in data transfer.
Final steps for GP-16 data transmission completion.
Step to exit recording mode on the MC-500MK2.
Steps for transferring data from MC-500MK2 to GP-16.
Steps for receiving data on GP-16 from MC-500MK2.
Troubleshooting steps for power-on display errors (7-seg LED).
Lists error messages and their potential causes during operation.
Step-by-step guide for adjusting the LCD contrast.
Assembly number for the main circuit board.
Indicates the perspective of the component layout diagram.
Detailed schematic diagram of the main circuit board.
Assembly number for the main circuit board.
Schematic diagram for the analog circuit board.
Schematic diagram for the volume control board.
Schematic diagram for the encoder control board.
Assembly number for the analog circuit board.
Part number for the analog board assembly.
Part number for the VR board.
Part number for the encoder board.
Assembly number and details for the switch board.
Assembly number and details for the LED board.
Schematic diagram for the switch control board.
Schematic diagram for the LED indicator board.
Assembly number and details for the power supply board.
Schematic diagram for the power supply circuit.
Overall system block diagram showing component interconnections.
Details and part number for the GP-16 Sub Board.
Instructions and considerations for mounting the Sub Board.
Diagram illustrating capacitor removal for Sub Board installation.
Diagram illustrating IC removal for Sub Board installation.
Diagram illustrating the installation of the Sub Board.
Diagram showing Sub Board orientation and mounting.
Diagram showing reuse of IC socket for Sub Board.
Diagram showing wiring connections for Sub Board.
Information on changes made to the main board components and design.
History of changes made to the Analog Board.
History of changes made to the GP-16 Sub Board.
Introduction to methods for identifying program ROM version.
Method for identifying major version changes (e.g., 1.00 to 2.00).
Method for identifying minor version changes (e.g., 1.01 to 1.02).
How to find version information on OTP and Mask ROMs.
Method to verify version during test mode operations.
Information on changes to how replacement parts are supplied.
Details of new part numbers for separate board assemblies.
Instructions for correcting the service notes document.
Notification regarding a part number error in the manual.
Specific corrections for part numbers on pages 2 and 4.
