Roland GK-2A - FEATURES; Product Overview and Capabilities; GK-2 A WARRANTY; Warranty Terms and Conditions

4
CONTENTS FEATURES
USING THE UNIT SAFELY.........2
FEATURES...............................4
GK-2A WARRANTY ................4
PANEL DESCRIPTIONS.............5
IMPORTANT NOTES................7
INSTALLATION .....................10
INSTALLATION NOTES........................ 10
1. Attaching the
Pickup Controller Unit..................... 12
Attaching the Divided Pickup with
Holders....................................................12
Attaching the Divided Pickup with
Double–sided Tape/Screws.................13
2. Attaching the Divided Pickup.......... 14
Attaching the Divided Pickup
with double–sided tape ........................14
Attaching the Divided Pickup
with Screws ............................................17
OPERATION .........................18
How to connect the GK-2A .................. 18
SPECIFICATIONS...................20
Thank you for purchasing the Roland GK-2A, a
sophisticated guitar pickup and dedicated
synthesizer control system.
When properly installed, the GK-2A can turn
virtually any electric or acoustic guitar into a
controller for Roland’s GR Guitar Synthesizers.
* Wherever [GR] is mentioned in this manual,
it refers to either the Roland Guitar
Synthesizer or the Roland V-Guitar System.
• The GK-2A system consists of a guitar-
mounted Pickup and Control Unit used to
drive a Roland GR Guitar Synthesizer.
• The GK-2A’s compact design allows it to be
installed on just about any electric or
acoustic guitar.
• The GK-2A’s controls give you easy access
to the [GR]’s basic operating modes.
GK-2A WARRANTY
Roland guarantees the GK-2A (and all included
parts) to be free of defects in materials and
workmanship. Contact your retailer or nearest
Roland Service Center if repairs become
necessary.
Roland cannot be responsible for any damage
caused to your guitar or the GK-2A as a result
of your attempt to install or remove the GK-2A.
If you are not confident with your ability to
properly install the Pickup or Controller unit
(especially where drilling is involved), please
contact your Roland retailer or nearest Roland
Service Center.