Roland GP-8 - IF YOUR GP-8 IS IN TROUBLE; Troubleshooting No Sound Issues; Troubleshooting MIDI and Control Issues

IF YOUR СР-8 IS IN TROUBLE
If no sound is heard.
œ Check if the connection is correctly made
as shown іп "CONNECTION" on page
7.
с-Сһеск if the СР-8 and the amplifier
are turned on.
<rCheck if the volume of the amplifier
is not turned down.
erCheck if the connection cable is not
damaged.
erCheck if the output level of the equalizer
or the Master Volume is set to "O".
eCheck if "EV—5 Parameter" is set to
"Equalizer Out Level" or "Master Volume"
with the EV —5's pedal returned to the
original position (=lifted).
erCheck if the external device connected
to the Send/ Return Jack is working
properly.
You cannot. change Patches with the
buttons. on the front panel.
crCheck if a decimal is not lit in the Patch
Display.
32
You cannot change Patches with
the FC—100.
trCheck if the correct cable is used for
connection.
srCheck if the RRC Cable is securely
connected.
zrCheck if the Selector Switch is set to
the RRC IN position.
The control pedal of the FC—100
does not work.
Check if the Mode Selector Switch on
the FC— 100 is set to the MODE I position.
The GP—8 does not function with MIDI.
с-Сһеск if the Selector Switch on the GP
—8 is set to the MIDI IN position.
eCheck if the MIDI channel of the GP
—8 is set to the same number to that
of the connected device.