3.3 Preparation of GO:PIANO88
⚫ Connect your instrument to a PC with a standard USB cable.
Note: Never connect the PC with more than one instrument for each update.
⚫ Make sure the power supply is reliable for the update, and please don’t execute by battery power.
3.4 Enter the Update Mode
⚫ Boot up your GO:PIANO88 by Update Mode.
Take the keyboard GO:PIANO88, press and hold “#1+#2+#3+#4”([A0] + [A#0] + [B0] + [C1]) keys together and
turn on the power, it will enter the update mode.
To Next Page
Loading...
