28
Conguring the Various Settings
Indication Value Explanation
Speaker Auto
Mute
Outputting Sound from Both Headphones and the Built-in Speakers (Speaker Auto Mute)
By factory default, the built-in speakers are set not to make sound when you connect a pair of headphones into the Phones jack. By changing the settings, you can make
sound come from both the headphones and the built-in speakers.
* Changing the setting to “O” also changes the tonal character of the sound you hear in your headphones.
O Sound comes from both headphones and built-in speakers.
On (default setting) Sound comes only from headphones.
Auto O
Making the Power Automatically Turn o After a Time (Auto O)
With the factory settings, the unit’s power automatically switches o after you stop playing or operating the unit for the amount of time you set. (This is the factory default
setting.)
If you don’t want the power to turn o automatically, change the “Auto O” setting to “O”.
O, 10 min., 30 min., 240 min. (default value: 30 min.)
Registration
Export
You can save your favorite settings or the piano’s setup to a USB ash drive, or load these settings that are saved to a USB ash drive into the piano (p. 23).
* Settings can be loaded only into another piano of the same model.
Registration
Import
Piano Setup
Export
Piano Setup
Import
Format Media All les saved in the piano’s internal memory or on a USB ash drive (commercially available) can be deleted (p. 24).
Factory Reset Here’s how to restore all registrations and internally saved settings to the factory-set condition (p. 24).
Version
Displays the version of the unit’s system program.
If a new system program becomes available, it can be used to update your piano. For details, refer to the following URL.
http://www.roland.com/support/ Enter the model name Ó refer to “Updater and Driver”
To Next Page
Loading...
