Roland HP 147 e - Keyboard and Pitch Settings; Key Touch Sensitivity

Owners Manual
12
Returning to 440Hz
While holding down the [Key Touch/Demo Song]
button, press the “C#4” key on the keyboard.
C#4
Key Touch/
Demo Song
Hold down...
Press
The reference pitch will be set to 440.0 Hz. This is the
most commonly used setting.
Note: Refer to “Functions assigned to the keyboard” on
page 17 for the exact location of the keys you need to press.
Setting the reference pitch to 442Hz straight
away
While holding down the [Key Touch/Demo Song]
button, press the “D#4” key on the keyboard.
The is the black key to the right of the one shown in
the above illustration.
Note: Refer to “Functions assigned to the keyboard” on
page 17 for the exact location of the keys you need to press.
The standard pitch will be set to 442Hz. This setting is
often used for concert pianos. The A4 (Middle A) key
will sound at 442Hz.
4.3 Setting the key touch
Your HP-147e also provides a function that allows you
to adapt it to your playing style, or to ensure that even
your children can play loud notes.
The are three Key Touch levels:
1. Press and hold the [Key Touch/Demo Song] but-
ton.
Key Touch/
Demo Song
While holding down...
2. While still holding the button, press one of the keys
labeled “Key Touch” to select the desired level.
Note: Refer to “Functions assigned to the keyboard” on
page 17 for the exact location of the keys you need to press.
Note: Though “light” may be a good settings for begin-
ners, they should also try to get used to playing with the
“Medium” setting.
Light: little strength is required to play at high vol-
umes.
Medium: the keyboard reacts normally (similar to an
acoustic piano).
Heavy: choose this only if you usually strike with too
much force and therefore play very bright/loud notes.
This is also a good setting for practising purposes.
Note: At power-on, the HP-147e selects the “medium” set-
ting.