Before You Play
If you don’t want the power to turn o automatically, change the “Auto O” setting to “OFF”!
The power to this unit will be turned o automatically after a predetermined amount of time has passed since it was last used for
playing music, or its buttons or controls were operated (Auto O function).
If you do not want the power to be turned o automatically, disengage the Auto O function (p. 41).
NOTE
• Any settings that you are in the process of editing will be lost when the power is turned o. If you have any settings that you want to keep,
you should refer to “Retaining the Settings Even After Power-o (Memory Backup)” (p. 41) and save your settings.
• To restore power, turn the power on again (p. 10).
• When turning the power on again, you must allow at least ve seconds after power-o before you once again turn the power on. If you fail
to allow enough time, the Auto O function might not be reset, preventing the power from turning on correctly.
15
Operation Guide Panel Descriptions Before You Play Performing Practicing
Convenient Functions
Appendix
Function Mode
To Next Page
Loading...
