Before You Play
Turning the Power On/O
NOTE
Once everything is properly connected (p. 11), be sure to follow the procedure below to turn on their power. If you turn on equipment in the wrong
order, you risk causing malfunction or equipment failure.
On
O
1
Softer Louder
2
Turning the power on
1. Press the [Power] switch.
After a brief interval, you’ll be able to produce sounds by playing the keyboard.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after turning the unit on is required before it will operate normally.
2. Use the [Volume] buttons to adjust the volume.
The volume increases when you press the button on the right, and decreases when you press the button on the left.
This will adjust the volume of the speakers if you’re using the speakers of the unit, or the volume of the headphones if headphones are connected.
Each volume setting (for speaker or headphone) is saved automatically.
Volume adjustment screen when using speakers Volume adjustment screen when using headphones
MEMO
The unit is designed so that nuances in the dynamics of your playing will be clearly heard even at low volume, and that the sound will remain clear
even at high volume.
Turning the power o
1. Press the [Power] switch.
The power is turned o.
14
To Next Page
Loading...
