Roland JC-60 User Manual

Details the layout and purpose of front panel controls for the amplifier.

Describes the input/output jacks and other components located on the rear of the unit.

Provides step-by-step instructions for achieving normal, chorus, vibrato, and distortion sounds.

Explains how to connect footswitches for remote control of effects like Chorus/Vibrato and Reverb.

Details connecting external speakers for increased volume and using the Line Out for PA mixers or recording.

Guides selection of input jacks based on guitar output level for optimal signal.

Explains how to adjust the overall loudness of the amplifier.

Describes how to shape the tonal character of the guitar sound.

Details how to achieve sweet, soft distortion effects by adjusting this control.

Explains how to adjust the depth of the reverberation effect for desired ambiance.

Guides adjustment of the vibrato effect's speed for different sonic textures.

Explains how to control the intensity or depth of the vibrato effect.

Describes how to switch between Chorus and Vibrato effects, and control them via pedal.