Roland Juno-1 - Editing Performance Control Functions

5. Editing
Performance
Control Functions
Using the Tune/Function
Button
0,
you
can
change the settings
(data) of
the Tuning
and other
functions for performance
control.
The changed
data is erased when the
unit is powered
off. If you
wish
to
retain the
data
even
after
powered off,
tal<e
an appropriate writing
operation.
Parameter
1. Tuning
2. Modulation Sensitivity
3. Portamento
Time
4. Preset Tone
Colors' DCO
Bender
Range
5. Foot Control
6. Pedal Switch
a.
How to edit
the Petformance
Control Functions
< OPERATION >
®
Press the
Tune/Function
Button
©
until
the
Display
(^
shows
the function
you
wish
to
edit.
(2)
Using the
a
Dial,
change
the value
of the
function to
your taste.
As shown in the picture, each time
you push the
Tune/Function
Button©, the function shown in
the Display changes.
14