Roland Juno-1 - VCF Parameters (cont.)

D VCF ENV Depth
Example T
This parameter
controls the cutoff point
of the VCF
in each note with the
ENV curve set in the
ENV
section. As you increase the
value, tone color
within one note changes more
drastically. Oto 127
are
valid
for
this parameter.
D
VCF ENV Mode
Example T
This is to select the polarity of the Envelope curve
that controls the
cutoff point
of the VCF. Usually,
"/V"
may be used, in
"V"
mode, ADSR
pattern
will be inverted.
Mode Display®
Function
Norma!
r--..
ENV serves to increase the VCF's
cutoff point.
Invert
i--"
ENV serves to decrease
the VCF's
cutoff point.
Normal with
Dynamics
Dt'-..
The ENV with Dynamics
serves to increase
the VCF's cutoff point.
Dynamics
dyri
This models rather special; the
ENV has nothing to do
with the VCF's
cutoff
point and the Dynamics directly
works
to
increase the VCF's
cutoff point.
D VCF LFO
Depth
Example T
This parameter
sets the depth of the LFO
modula-
tion that
changes the cutoff point of the
VCF
(=growl effect).
to 127 are valid
for
this
parameter.
D
VCF Keyboard Follower
Example
This parameter can
shift the cutoff point depending
on the key
played {=pitch). to
15
are
valid, and
decreasing the
value will make the higher pitch
softer.
o
VCF Aftertouch Sensitivity
Example T
When the
Aftertouch is
controlling the cutoff fre-
quency of the
VCF, this
parameter sets the sen-
sitivity of the
effect.
to 15 are
valid for this
parameter.
24