Roland JUNO-D - Switching Chord Sets

25
Try out the sounds
Quick Start
■ Switching chord sets
Then, try to change chord sets.
fig.q04-10
3. Use VALUE [-]/[+] to select a Chord Set.
The user chord set appears after the preset chord sets.
4. When you press [EXIT], the Multi-chord Memory function will remain on
and you will return to the previous screen.
If you want to select a chord set once again, press [CHORD MEMORY] so it goes out,
and then press [CHORD MEMORY] once again so it is lit.
The selected chord set remains stored in memory even while the power is off.
5. To turn off the Multi-chord Memory function, press [
CHORD MEMORY
]
again so the indicator goes out.
5
43
Multi-chord set list (p.
122)
You can create your own chord set by saving chords you have created.
For further information, refer to Creating an original chord set (User Chord Set)
(p. 64).
JUNO-D_e.book 25 ページ ２００４年６月１１日 金曜日 午後１時２１分