Use the Safely Remove Hardware icon in the Windows task tray to un-
mount the USB memory and then disconnect the USB memory from
your computer.
[ Mac ]
Drag the Drive icon of the USB memory into the trash in the dock and then
remove the USB memory from your computer.
3. Turn off the power to the JUNO-Di.
4. Connect the USB-memory device to JUNO-Di.
5. Turn the power on to the JUNO-Di. The update process starts automatically.
Moments later, "Completed!" is displayed.
6. Turn off the power to the JUNO-Di and then disconnect the USB-memory device.
7. The update is complete. Please verify the version number with the procedure
described in "How to tell the version" part of this document.
* Unmount the USB-memory device before turning JUNO-Di on. Or else the
update process will start again.
* Remove the update file "juno_di_up.bin" on the USB-memory device for normal
use.
© 2012 Roland Corp. U.S.
To Previous Page
Loading...
