[R] [M] [S] buttons
(VINTAGE FLT TYPE)
If a vintage type model is selected,
these buttons change the type
of lter.
[R] models a Roland lter, and [M]
and [S] model vintage synthesizers
made by other companies.
[HPF] knob
Adjusts the cuto frequency of the
high-pass lter.
[FREQ] knob (CUTOFF)
Species the cuto frequency of
the low-pass lter. The frequency
region above the cuto frequency is
cut, producing a more mellow tonal
character.
[RES] knob (RESONANCE)
Boosts the region of the lter’s cuto
frequency. Higher values produce a
stronger result, giving the sound a
distinctively synthesizer-like character.
SLOPE (FILTER SLOPE)
Selects the type of slope for the low-pass lter.
-12dB/OCT, -24dB/OCT
[ENV-1] [ENV-2] buttons (FLT ENV MODE)
Selects the envelope that is used to control the ENV-1/
ENV-2 cuto frequency.
ENV MOD (FLT ENV DEPTH)
Adjusts the amount by which the cuto frequency is
controlled by the envelope.
FILTER MOD
Adjusts the amount by which the LFO modulates the
cuto frequency.
KEY FOLLOW (FLT KEY FOLLOW)
Adjusts the amount by which the keyboard pitch aects
the cuto frequency (key follow). With smaller values, the
cuto frequency becomes lower as you play higher notes.
To Next Page
Loading...
Need help?
General
