Roland JV-880 - Program Change; Program Bank Select; Control Change

Program
change
Program
Change Receive
Switch
S y s t e r-'i M I D I R x
=
w i t
c h
P r o 9 r a n c h a n g e
=
H
This parameter
determines whetiier or not the JV-880
will respond to
Program
Change messages
from
an external MIDI device.
Settings:
ON
(respond)/OFF
(ignore)
*
Performances, Patches
or
Rhythm
Sets
may sometimes not change as expected
if either the
Program Change receiving switch or
the bank select receiving switch
has been set to OFF.
*
The
setting of
the Program Change receiving
switch
in
the Performance Part parameters
has
no
effect when this switch
is
OFF.
Program bank select
Bank Select Receive Switch
S
y s i e n
M
I D
I
R x s w i t
c
h
P r 9 r a n b a n k s e 1
=
N
This parameter
determines whether or not the JV-880 will
respond to bank select
(Control change
No.O) messages from an external MIDI device.
Settings: ON (respond)/OFF (ignore)
Control
change
Control Change Receive Switch
y s
t e r-'i M I D I R x s w i t c
h
n
t r o 1
c h a
n 9 e
=
H
This
parameter determines whether or not the JV-880 responds to Control Change messages
other
than
modulation,
volume, bank select (See P.2-1
1)
and RPN from an external MIDI device.
Settings:
ON (respond)/OFF
(ignore)