Roland JV-880 - Control Channel; Unit Number

Control
channel
Syc.tep-i
MIDI
I
J
o n
t- T" o
1 C- h a n
n s
1
—
1 6
This
parameter lets you
change Performances
by MIDI message, or
sets the channel
for
turning the
chorus/reverb
switch
on and off
(See
P.7-13).
Range:
1
—
16/OFF
1
—
16 :
Performances
can
be changed (over
the set channel)
by
reception of
a bank
select message
and
an
appropriate Program
Change
message. When only
a
Program Change
message is received,
the Performances
change
only
between
presets A and B, or
between internal
memory and
a
Data
Card (See P.2-10).
Also,
the
chorus/reverb
switch is turned
on or off when receiving
chorus/reverb
control change
data.
OFF : Performances
cannot be selected via
MIDI.
Also,
the
chorus/reverb
switch
cannot be turned on or off via MIDI.
* This parameter is only
selected when
the mode is
changed
from
Performance Play/Edit
to
System Edit.
Unit number
System MIDI
U n i t
n
y r-'i b e r
=
1 7
The
Unit
number is a device
identification
number
designed for use with System
Exclusive data
operations.
The
JV-880
receives
System
Exclusive data only when
the appropriate
Unit number
is
specified.
Set the Unit
number to
match the
number of
the- sending/receiving device when
sending/receiving
System
Exclusive data.
Range: 17
—
32
When controlling a setup of
several JV-880s,
assign different Unit
numbers
to each
JV;
in
this way,
System
Exclusive
data can be sent
and received by individual
units
(See P.
10-35).
R^