Roland JV-880 - Chorus Switch; Reverb Switch; Rx Channel

PARAMETER
FUNCTIONS
[SYSTEM
EDIT
MODE]
Chorus
switch
C
h o r u
=.
s w i t c h
=
N
Output
mode
=
20UT
This
parameter determines whether the chorus effect
is applied (ON)
or not.
Settings:
ON/OFF
*
The
chorus
depth changes depending
on
the
settings made for
the
Patch
or Performance.
*
The chorus setting
in
the Patch Common parameters
(See
P. 6-9)
and
the
chorus
setting in
the
Performance Common parameters
(See P.
7-6) have
no effect when
this is set to
OFF.
Reverbswitch
S y
st epi
Ch r us
-•
w it ch
=
nN
Output
mode
=
20UT
This parameter
determines whether
the
reverb
effect is applied (ON) or
not.
Settings:
ON/OFF
*
The reverb depth changes
depending
on
the
settings made for
the Patch or
Performance.
*
The reverb setting
in
the Patch Common
parameters
(See P.6-11)
and the reverb
setting
in
the
Performance Common parameters (See P.7-8)
have
no effect when
this is set
to OFF.
Rxchannel
Patch Receive Channel
Systen
MIDI
R X c- h a
n n e 1
=
8 1
This parameter
determines
the
Patch receive
channel.
Patches can be
changed (over the set channel) by reception of
a bank select
message and an
appropriate Program
Change message. When only a Program Change
message is received, the
Patches
change
only between presets A and B, or
between internal memory
and
a Data Card (See P.
2-
10).
Range: 1
—
16
*
This parameter
is only selected when
the mode is changed
from Patch Play/Edit
to System
Edit.