Roland KR-115 - Playback from a Marker Location; Erasing a Marker

99
Chapter 4 Practice Functions
Chapter 4
Marker A is placed at the beginning of the measure you selected.
“- - -” on the screen will change to the number of the measure where you placed the
marker.
5.
In the same way, touch the Marker B <- - -> to set Marker B.
It is not possible to assign marker B to the same location or a measure before marker A.
■ Playback from a Marker Location
1.
At the marker screen, touch the measure number of the marker you want
to go to.
fig.d-mark1-5.eps_60
Playback will start from wherever Marker A or Marker B are set.
When you play the song, playback starts from the position of the marker.
With the song playing back, playback will continue if you touch Marker A or Marker
B on the Marker screen.
■ Erasing a Marker
1.
Touch <Clear> for the marker you want to erase.
fig.d-markclear.eps_60
The marker disappears and the on-screen display changes to <- - ->.
Markers can also be assigned
in units of beats rather than
measures. Refer to “Placing a
Marker in the Middle of a
Measure” (p. 164).
KR117_115_r_e.book 99 ページ ２００６年２月２７日 月曜日 午前１１時５５分