K
Kenneth ParkerSep 23, 2025
What to do if nothing appears on screen of my Roland Musical Instrument?
- MMartin FloresSep 23, 2025
The KR-7/5 uses a liquid-crystal screen, so text may not be displayed when the ambient temperature is below freezing.
To Next PageTo Next PageWhat to do if nothing appears on screen of my Roland Musical Instrument?
The KR-7/5 uses a liquid-crystal screen, so text may not be displayed when the ambient temperature is below freezing.
What to do if no sound is heard when a MIDI instrument is connected to my Roland Musical Instrument?
If you're not hearing sound when a MIDI instrument is connected to your Roland Musical Instrument, make sure all devices have been switched on. Also, confirm that the MIDI cables are connected correctly, the MIDI channel matches the connected instrument, and the Computer switch on the bottom of the KR-7/5 is set to “MIDI”.
What to do if no sound is heard when the keyboard is played on my Roland Musical Instrument?
If you're not hearing any sound when playing the keyboard on your Roland Musical Instrument, check if Local Control has been set to “Off.” When Local Control is off, no sound is produced when playing the keyboard, so set Local Control to “On”.
Why are sounds heard twice (doubled) when the keyboard is played on my Roland Musical Instrument?
If sounds are heard twice (doubled) when you play the keyboard on your Roland Musical Instrument, check if the KR-7/5 is in layer play. When the KR-7/5 is connected to an external sequencer, set it to the Local OFF mode. Alternatively, the sequencer could be set so its Soft Thru feature is OFF.
Why do vertical lines appear in the screen or color is “washed out” at the edges of the screen on my Roland Musical Instrument?
These occur due to the nature of a liquid crystal display, and do not indicate a malfunction. They can be minimized by adjusting the brightness of the screen.
Why is automatic accompaniment not heard on my Roland Musical Instrument?
If you're not hearing automatic accompaniment on your Roland Musical Instrument, check these:* Make sure the Balance knob hasn't been moved all the way to the right.* Verify you've pressed the One Touch Program [Arranger] button. If it hasn't been pressed, only the rhythm pattern plays.* Ensure the 16-track Sequencer screen isn't displayed.
Why does the bass range sound odd, or why is there a vibrating resonance on my Roland Musical Instrument?
When listening through speakers: Playing at loud volumes may cause instruments near the KR-7/5 to resonate. Resonance can also occur with fluorescent light tubes, glass doors, and other objects. In particular, this problem occurs more easily when the bass component is increased, and when the sound is played at higher volumes. Use the following measures to suppress such resonance:* Place speakers so they are 10–15 cm from walls and other surfaces.* Reduce the volume.* Move the speakers away from any resonating objects.
What to do if I can’t select a tone or Music Style on my Roland Musical Instrument?
If you're having trouble selecting a tone or Music Style on your Roland Musical Instrument, touch several times to return to the Basic screen, and then select a tone or Music Style.
Why is the tuning or pitch of the keyboard or song off on my Roland KR-5 Musical Instrument?
If the tuning or pitch of the keyboard or song is off on your Roland Musical Instrument, check if you have set transpose. Also, verify that the settings for the “Temperament” and “Stretch Tuning” are correct.
What to do if I cannot use a connected MIDI device and computer simultaneously with my Roland KR-5?
You cannot use MIDI connectors and the computer connector at the same time on your Roland Musical Instrument. When a MIDI device is connected to the MIDI connector, ensure that the computer switch is set to “MIDI”. When a computer is connected to the Computer connector, set the switch to either “MAC,” “PC-1,” or “PC-2.”
General| Type | Digital Piano |
|---|---|
| Number of Keys | 88 |
| Effects | Reverb, Chorus |
| Display | LCD |
| Connections | Output (L/Mono, R), Input (L/Mono, R), MIDI |
Connect the pedal cable to the rear panel pedal connector.
Connect the speaker cable from the speaker box to the rear panel speaker connector.
Connect the power cable to the bottom panel AC inlet and plug into an outlet.
Instructions on how to activate the one-touch piano preset for optimal piano performance.
Steps to set up and use the one-touch arranger for automatic accompaniment.
Guide to selecting and playing internal songs or songs from floppy disks.
How to display musical scores for songs and check played notes.
Details on using the practice function for segment repetition and tempo adjustment.
How to change the tempo of songs and music styles using buttons or the dial.
Instructions for recording keyboard performances without accompaniment.
Guide to recording performances along with automatic accompaniment.
How to record your performance while listening to internal songs or disk songs.
Method to delete recorded performances from memory.
How to save and store current settings as a User Program for quick recall.
Steps to load previously saved User Program settings.
Explains the 16-track sequencer for layering multiple performances.
Methods for creating custom music styles by combining internal styles or converting songs.
How to save created User Styles to floppy disks or user memory.
How to delete saved User Styles from floppy disks or user memory.
How to assign various functions to pedals and performance pads.
Guide to connecting MIDI sequencers and sound modules for performance data exchange.
Instructions for connecting to audio equipment for playback or recording.
Instructions for connecting the KR-7/5 to a computer for sequencing and data transfer.
Checks for power cord connection and proper power switch operation.
Troubleshooting steps for no audio output, checking volume and connections.
Steps to resolve issues with automatic accompaniment not playing as expected.
