15
Creating an original song (pattern)
2.
Press [F2 (TR-Rec)].
The TR-REC standby screen will appear.
Here you can specify the time signature and length of the pattern.
fig.Q2-02
3.
Press [CURSOR (down)] to move the cursor to “Rec Measure Length.”
4.
Use [VALUE] or [INC/DEC] to select “1.”
Leave the settings at their default values, with a Rec Beat (pattern time signature) of
“4/4” and Rec Velocity of “REAL.”
5.
Press [F6 (BPM/Click)].
The BPM window will appear.
6.
Turn [VALUE] to set BPM to
= 140.0
.
7.
Press [F6 (Close)] to close the BPM window.
8.
Press [PLAY] to begin recording.
Now you can record part 10.
fig.Q2-02a
Rec Velocity specifies the
volume of the notes that
you will input.
With the “REAL” setting,
you can vary the dynamics
of the notes by the force
with which you strike the
pads.
QS_e 15 ページ ２００５年６月２２日 水曜日 午後３時１５分
To Next Page
Loading...
