Roland MC-909 - Select a Sound; Selecting an Internal Sound

4
Creating an original song (pattern)
Select a sound
■ Selecting an internal sound
Here’s how to select a preset patch / rhythm set as the patch / rhythm set used by
each part.
Selecting a rhythm set (drums) for part 10
fig.02
1. Press [PATCH/SAMPLE] to enter Patch mode.
2. Press part button [10] so it’s lit.
If [PART] (SELECT/MUTE) is lit, press the button so it goes out, and then press part
button [10] so it’s lit.
3. Press [F1 (List)].
4. Press [F4 (Rhythm)] to display the Rhythm Set List.
364
1
5
2
A rhythm set is already
selected for part 10.
QS_e 4 ページ ２００５年６月２２日 水曜日 午後３時１５分