9
6. Move to the end of the section you want to edit—as you
do, the selected region becomes highlighted.
7. Press F3 (Rgn In/Out) again. If you’d like to start over again,
hit F3 (Rgn In/Out) twice.
If you jumped to this section from Page 6, click here to jump back.
Quick-Selecting a Single Measure for Editing
You can use the Quick Region feature to choose a single
measure for editing. Here’s how:
1. Press SEQUENCE.
2. Press F5 (Seq Edit) to display the SEQUENCE EDIT screen.
3. Use 6 or 5 to select the track you want to edit.
The track label
becomes dark when
the track is selected.
4. Move to the beginning of the measure you want to edit,
and then press F4 (Quick Rgn)—the measure turns dark to
show that it’s now selected for editing.
To start over again, hit F3 (Rgn In/Out) twice.
If you jumped to this section from Page 6, click here to jump back.
Opening the Edit Menu on the Built-In LCD
1. After selecting the desired audio
region on the SEQUENCE EDIT
screen, press F5 (Command) to
open the Edit Menu.
2. Select the desired menu item
and hit ENTER.
To jump to a list of the menu items that have
to do with editing your recording, click here.
To Next Page
Loading...
