To Next PageTo Next Page
Need help?Do you have a question about the Roland GK-3 and is the answer not in the manual?
General| Type | Divided Pickup |
|---|---|
| Compatibility | Compatible with Roland Guitar Synthesizers |
| Connectors | 13-pin Connector |
| Power Supply | Powered by connected GK-compatible device |
| Pickup Configuration | Hexaphonic Pickup |
| Mounting | Surface Mount on Guitar |
Explains the meaning of warning and caution notices used in the manual.
Explains the meaning of symbols used for important instructions and warnings.
Instructions regarding the power supply for the unit.
Guidance on where to place the unit to avoid interference and damage.
Instructions for cleaning and maintaining the unit.
Further advice on using the unit safely and effectively.
Describes the divided pickup component and its function.
Explains the GK Volume control and its purpose.
Identifies the GK connector for connecting to other devices.
Describes the input jack for the guitar's normal pickup signals.
Explains the function of the select switch for output selection.
Describes the DOWN/S1 switch and its variable functions.
Describes the UP/S2 switch and its variable functions.
Explains the power indicator light and its meaning.
Important warnings and advice before installing the GK-3 on a guitar.
Details how to adjust the divided pickup for optimal string sensitivity.
Explains three methods for attaching the divided pickup to a guitar.
Explains how to use the clearance gauge for pickup height adjustment.
Describes how to check and fine-tune the pickup height.
Details the methods for attaching the controller unit to the guitar.
How to check and adjust the length of the pickup cable.
