Need help?Do you have a question about the Roland BOSS OD-200 and is the answer not in the manual?
General| Type | Overdrive/Distortion |
|---|---|
| Footswitches | 2 |
| Inputs | 1 x 1/4" (instrument), 1 x 1/4" (control) |
| Outputs | 1 x 1/4" (mono/stereo) |
| Connectivity | MIDI |
| Power Supply | 9V DC |
| Connectors | 1/4" jacks, MIDI, USB |
| Recommended Load Impedance | 10k ohms or greater |
| Weight | 620 g (1 lb 6 oz) |
Detailed explanation of all controls and indicators located on the top panel of the OD-200 effect pedal.
Details on the INPUT, OUTPUT, and CTL 1, 2/EXP jacks on the rear panel for connecting equipment.
Information on MIDI jacks, USB port, and DC IN jack for connecting external devices and power.
Step-by-step guide on how to save edited effect settings to the unit's memory.
Instructions for recalling previously saved effect settings from the unit's memory.
Guide to basic operations for navigating and using the unit's menu system.
How to connect and assign functions to external footswitches via the CTL 1, 2/EXP jack.
Comprehensive list of parameters available within the unit's menu system and their explanations.
Procedure for resetting the OD-200 unit to its original factory default settings.
Instructions for correctly installing batteries into the unit, including safety precautions.
Instructions on how to attach the included rubber feet to the unit for stability and floor protection.
Key technical specifications for the BOSS OD-200 HYBRID DRIVE, including power, dimensions, and accessories.
Essential safety warning regarding keeping small parts, like included parts, away from children.
Important information and precautions regarding unit repairs and potential data loss.
Further precautions for safe operation, data backup, and cable usage to prevent issues.
Information regarding third-party software licenses, trademarks, and product names used in the manual.
To Next Page
