Controlling MFX Via MIDI
You can control the MV-8800’s current MFX settings from a sequencer by
sending the MV-8800 MIDI messages:
You can tweak the same MFX parameters that are being controlled by the
MV-8800’s C knobs. You do this by sending the MV-8800 the same MIDI
Control Change messages the knobs are using.
To learn about setting up and using the C knobs, see the MV-8800
Owner’s Manual.
When the MFX is using any of the Analog Modeling Bass effects, you
can play and shape the bass’s sound from an external sequencer. You
can:
play bass notes—using MIDI on/off note messages.
control the way the bass sounds—using MIDI Control Change #1
messages to modulate the sound.
bend bass notes—using MIDI Pitch Bend messages.
The End
We hope you’ve found this workshop helpful. Keep an eye out for
other MV-8800 Workshop booklets, all available for downloading at
www.RolandUS.com.
For the latest MV-8800 updates and support tools, visit the Roland U.S.
Web site at www.RolandUS.com. If you need personal assistance, call
our amazing Product Support team at 323-890-3745.
•
•
•
•
•
To Previous Page
Loading...
