Roland OCTAPAD PAD-80 - Adjusting the Volume of each Part (PART LEVEL); Exiting Phrase Loop Mode

48
Adjusting the Volume of Each Part (PART LEVEL)
Here’s how to adjust the level of parts 1–3.
1. From the PHRASE LOOP screen (during Rec or Play), choose the QUICK MENU command Part Level.
Use the three knobs to adjust the level of parts 1–3. Press the [BACK] button to return to the REC/PLAY screen.
Indicates the current part and each part’s kit.
Use [Knob 1]–[Knob 3]
to adjust the level of
parts 1–3.
You can use [Button 1] (PART 1)–[Button 3] (PART 3) to switch
the current part.
Exiting Phrase Loop Mode
From the standby condition (i.e., stopped), press the [STANDBY] button to make it go dark; you will exit Phrase Loop mode and
return to the KIT screen.
* If you leave the phrase loop mode without saving your data it will be lost. (A reminder will appear in the screen.)