To Next PageTo Next Page
Need help?Do you have a question about the Roland TD-6 and is the answer not in the manual?
General| Polyphony | 64 voices |
|---|---|
| Type | Drum Module |
| Trigger Inputs | 10 |
| Outputs | Stereo (L/Mono, R), Phones |
| MIDI | In, Out |
| Effects | Reverb |
| Display | LCD |
| Inputs | Mix In Jack (Stereo) |
| Power Supply | AC adapter (DC 9V) |
Explains the meaning of WARNING and CAUTION symbols used in the manual to alert users to risks.
Details the front and rear panels, including displays, knobs, buttons, and connectors.
Guides on mounting the unit, connecting pads, pedals, and audio gear.
Step-by-step instructions for safely powering the TD-6 unit on and off.
Procedure to reset all pad, instrument, song, and other data to factory settings.
Section on creating custom drum kits, including parameter settings.
Guide to configuring pad and trigger parameters for optimal performance.
Adjusting global settings like display contrast, volume, and factory reset.
How to select and switch between the TD-6's preset and custom drum kits.
Methods for selecting a specific pad to edit its associated instrument settings.
Guide on selecting instruments from categories like KICK, SNARE, and TOM for pads.
How to adjust Level, Pan, Pitch, and Decay for instruments assigned to pads.
How to set the volume level for individual pads and balance sounds.
Making overall settings for the drum kit, including master volume and naming.
Copying all settings from one drum kit to another.
Restoring reconfigured drum kits to their original factory conditions.
Specifying the pad type for accurate signal reception and avoiding retriggering.
Detailed pad adjustments including sensitivity, threshold, and trigger curve.
Regulating pad response sensitivity to match playing style and achieve desired volume.
Setting minimum force for trigger signals to prevent false triggers from vibrations.
Preventing unintended triggering from adjacent pads by adjusting crosstalk cancel.
Advanced adjustments for scan time, retrigger cancel, mask time, and rim sensitivity.
Adjusting global settings applicable to the entire TD-6 unit.
Restoring all unit settings to their original factory defaults.
Turning the metronome click sound on or off by pressing the CLICK button.
Setting the tempo for the metronome click, which adjusts to song tempos.
Methods for selecting songs, including browsing by category or number.
Steps to take before recording, including MIDI, part, and other settings.
Procedure for entering recording standby and setting parameters like time signature and tempo.
Enabling General MIDI mode for playing back GM score data.
Steps to resolve issues where the unit produces no sound.
Troubleshooting problems with rim shots or cross sticks not sounding.
Troubleshooting issues where cross stick sounds are not produced.
Addressing no sound output when pads are struck softly.
Troubleshooting issues where the metronome click sound is not heard.
Troubleshooting why songs are not playing back correctly.
Troubleshooting issues where a specific part within a song is not playing.
Troubleshooting when the TD-6 does not play with external MIDI devices.
Resolving no sound or low volume issues with devices connected via the MIX IN jack.
Troubleshooting drum kits that do not sound as expected.
Troubleshooting issues where pads do not sound as intended.
Troubleshooting songs that do not sound as intended.
Troubleshooting distorted sound in headphones or output.
Troubleshooting general operation issues like screen switching and recording.
