Roland RP30 - Performance Features; Metronome Usage

The metronome provides a steady beat to help you practice at a preset
tempo.
To turn the metronome on or off:
Press and hold the [FUNCTION] button, then press the [METRONOME
ON/OFF] key to turn the function on or off. When the metronome is in
use, the LED indicator for the [FUNCTION] button will flash with the
current tempo.
The tempo of the metronome can be adjusted. Please refer to “Tempo”
for details.
Note:
The metronome function is disabled in Demo Song mode.
To change the metronome time signature:
Press and hold the [FUNCTION] button, then press one of the [BEAT]
keys to change the time signature of the metronome, over a range of 0,
2–6.
Note:
Press and hold the [FUNCTION] button, then press the [BEAT +] and
[BEAT -] keys at the same time to restore the default setting “4.”
To set the metronome volume:
Press and hold the [FUNCTION] button, then press one of the [VOL-
UME] keys to set the metronome volume, over a range of 0–10.
Note:
Press and hold the [FUNCTION] button, then press the [VOLUME +]
and [VOLUME -] keys at the same time to restore the default volume
“7.”
Metronome
13
C
M
Y
CM
MY
CY
CMY
K
Roland_RP30_manual_G02_20170905.pdf 13 17/9/5 17:08