Roland RP30 - Panel Description; Front Panel Controls; Pedal Functions

Panel Description
Front Panel
Pedal
1. [POWER] Switch
Turn the power on or off.
2. [VOLUME] Knob
Adjust the master volume.
3. [FUNCTION] Button
Press and hold it to access secondary functions
of other keys.
4. [TONE] Keys
Press and hold the [FUNCTION] button, then press
one of these keys to select a preset tone.
5. [TONE DEMO] Key
Press and hold the [FUNCTION] button, then press
this key to start or stop playing the tone demo.
6. [DEMO SONG] Key
Press and hold the [FUNCTION] button, then press this
key to start or stop playing the demo song.
7. [VOLUME] Keys
Press and hold the [FUNCTION] button, then press one
of these keys to adjust the metronome volume.
8. [METRONOME ON/OFF] Key
Press and hold the [FUNCTION] button, then press this
key to turn the metronome on/off.
9. [BEAT] Keys
Press and hold the [FUNCTION] button, then press one
of these keys to set the metronome time signature.
10. [TEMPO] Keys
Press and hold the [FUNCTION] button, then press one
of these keys to edit the tempo value.
17. Soft Pedal
When you step on the soft pedal, all notes played on the
keyboard will have a softer effect.
18. Sostenuto Pedal
When you step on the sostenuto pedal, the notes played
before you step on the pedal will have a sustain effect.
19. Sustain Pedal
When you step on the sustain pedal, all notes
played on the keyboard will have a longer sustain.
04
1
5
6
7
8
9
10
2
4
3
17
18
19
C
M
Y
CM
MY
CY
CMY
K
Roland_RP30_manual_G02_20170905.pdf 4 17/9/5 17:08