_____________________________________________________________________
Cool Effects
_____________________________________________________________________
LofF . Bit/RateDown
PreFilter - On
SampRate - 1/16
Down to... - 16bit
PostFilter - Off
FX Level - 75
Dry Level - 0
Fil . Filter
Type - Notch
Slope<oct> - -12db
Cuttoff - -12db
Resonance - 0db
Gain - 5db
NS. Noise Suppress
Threshold - 30
Release - 57
CTRL
C1 - Fil ON Type
C2 - LoF ON Bit
C3 - LoF ON PstFlt
C4 - Fil ON Cutoff
C5 - LoF SampRt
C6 - LoF On FX Lev
StM1 - On SampRt
LOC
PatchLoc - INS MASTER
Mixer... [<FX PATCH>]
From here you’re on your own. I have the Sample Rate set for StM1 for sequencing changes in the
sample rate in time with the music. Depending on what kind of vocals you’re using, and how they
are sung, if you sequence the Sample Rate just right you can actually come close to achieving that
effect used for Cher's vocals in « Believe ». Don’t forget to set your sequencer to the tempo of your
song to pull this off. Also to achieve a more vocoderish feel, resample the vocals at a different pitch
and play the original and the resampled one through the effect simultaneously. From there Flanging
and slicing is fun.
_____________________________________________________________________
Fuzz Brush
Ok, You want the Virtual Radio Effect.
In the parameters for V-radio, enter 12,6,0,100,0
Edit the stepmod to the following values:
Repeat 16 [1,1,2,6,22,50,68,52,32,29,17,11,7,5,1,1]
16th notes song
---
Now make sure and save [Shift+Enter] Once you input BPM for your song, it will match tempo and
provide a fuzzy radio that can be used for percussion effect.
Alter according to your preferred deviation.
To Next Page
Loading...
