Need help?Do you have a question about the Roland SE-02 and is the answer not in the manual?
General| Product type | Analog synthesizer |
|---|---|
| Product color | Black |
| Sound effects | Delay |
| Keyboard number of keys | - |
| Maximum polyphony (notes) | 1 |
| Built-in display | Yes |
| Power source type | AC |
Weight and Dimensions| Depth | 128 mm |
|---|---|
| Width | 300 mm |
| Height | 46 mm |
| Weight | 950 g |
Details on using the USB port for MIDI, audio, patch management, and firmware updates.
Details on the three oscillators, their waveforms, tuning, and sync functions.
Details RANGE, FINE, and WAVEFORM settings for the third oscillator.
Explains cross-modulation effects between oscillators and the filter cutoff.
Controls output levels of oscillators and noise, mixing them for sound creation.
Settings for filter and amplifier envelopes, including cutoff, emphasis, and contour.
Details Low Frequency Oscillator functions for modulation, including rate and waveform.
Settings for the delay effect, including time, regeneration, and volume amount.
Inputting notes for up to 16 steps, creating loops, and storing up to 128 patterns.
Configuration of MIDI channel, CHAIN mode, AUTO OFF, SAVER TIME, and other system settings.
To Next Page
