_____________________________________________________________________
NoizLooper
Patch: 20: Virtual Analog Synth
COM: off,64,-,on,40
LFO: 20,-,tri,o x 2
VCO: on,saw,100,41,0,12,0,7,on,saw,0,0,5,80,0,osc1,noise
VCF:
50,60,0,0,100,LPF,-24,0,100,100,13,36,30,100,20,0,on,23,0,35,0,80,0,36,0,0,0
DLY: mono,-,85,o x 1,27,50
C/F: flang,inv,-,2,54,17,1/32
Effect control
C1:VCA Env.Dp:0-100
C2:DLY TempoS:half note - o x 2
C3:DLY FX Lev:0-100
C4:C/F Reso :0-92
C5:VCF Cutoff:0-100
C6:VCF Reso :0-100
StM1 :Com on Note
StM2 :-----------
Step sequencer
repeat,16,1/16,song,83%
"Rst,A0,Rst,D1,Rst,E1,Rst,G2,G1,Rst,G1,Rst,A1,Rst,A1,E2"
Here's how it works:
Use C5 to tweek "noizes" into the loop.
Use C6 to change texture of the noize.
The loop will constantly update itself depending on what you last fed it with C5.
If you need the loops to die off quicker change the DLY Feedback setting on the synth.
Experiment with different loop lengths by adjusting C2.
_____________________________________________________________________
Knowledge Base
_____________________________________________________________________
SP-808: Internal Memory
The SP-808 records and plays directly using a built-in Zip drive. A Zip disk can store up to:
64 Songs
64 Sample Banks
1024 Samples - 16 samples per bank
99 Preset Effect Patches
99 User Effect Patches
2000 Phrase Events per song
Note: Actual capacity will depend on the number, size and length of recorded samples.
SP-808: Sampling Time
The SP-808 records directly to a built-in Zip drive. The recording time or sampling time is shared
between all tracks and samples. The capacity of a Zip100 disk is 100 MB. This equals approximately
46 minutes total record time at a 44.0 kHz mono sampling rate, and approximately 64 minutes total
sampling time at a 32.0 kHz mono sampling rate.
To Next Page
Loading...
