EasyManua.ls Logo

Roland TD-27 - Page 8

Roland TD-27
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Status Data byte Status
F0H 41H, dev, 00H, 00H, 00H, 63H, F7H
12H, aaH, bbH, ccH, ddH, eeH,
... ffH, sum
Byte Explanation
F0H Exclusive status
41H ID number (Roland)
dev Device ID (dev: 10H–1FH, 7FH)
00H Model ID#1 (TD-27)
00H Model ID#2 (TD-27)
00H Model ID#3 (TD-27)
63H Model ID#4 (TD-27)
12H Command ID (DT1)
aaH Address MSB
bbH Address
ccH Address
ddH Address LSB
eeH Data: the actual data to be sent. Multiple bytes of data are transmitted in order starting from the address.
::
ffH Data
sum Checksum
F7H EOX (End Of Exclusive)
* The amount of data that can be transmitted at one time depends on the type of data, and data will be transmitted from the specified
starting address and size. Refer to the address and size given in “3. Parameter Address Map.”
* Data larger than 256 bytes will be divided into packets of 256 bytes or less, and each packet will be sent at an interval of about 20
ms.
3. Parameter Address Map
* Transmission of “#” marked address is divided to multiple packets. For example, ABH in hexadecimal notation will be divided to 0AH and
0BH, and is sent/received in this order.
Trigger 1–8 corresponds to the TRIGGER BANK No.1–8 parameters.
+------------------------------------------------------------------------------+
| Start | |
| Address | Description |
|-------------+----------------------------------------------------------------|
| 00 00 00 00 | Current [Current] |
|-------------+----------------------------------------------------------------|
| 01 00 00 00 | Setup [Setup] |
|-------------+----------------------------------------------------------------|
| 02 00 00 00 | Trigger 1 [Trigger] |
| 02 01 00 00 | Trigger 2 [Trigger] |
| : | |
| 02 07 00 00 | Trigger 8 [Trigger] |
|-------------+----------------------------------------------------------------|
| 03 00 00 00 | SetList 1 [SetListParams] |
| 03 00 10 00 | SetList 2 [SetListParams] |
| : | |
| 03 03 70 00 | SetList 32 [SetListParams] |
|-------------+----------------------------------------------------------------|
| 04 00 00 00 | Kit 1 [Kit] |
| 04 02 00 00 | Kit 2 [Kit] |
| : | |
| 05 46 00 00 | Kit 100 [Kit] |
+------------------------------------------------------------------------------+
* [Kit]
The assignments to each pad within the [Kit] are as follows.
[KitPadCommon]、[KitPadInst]、[KitPadVEdit]
KICK HEAD 1
SNARE HEAD 2
SNARE RIM 3
TOM1 HEAD 4
TOM1 RIM 5
TOM2 HEAD 6
TOM2 RIM 7
TOM3 HEAD 8
TOM3 RIM 9
HI-HAT HEAD 10
HI-HAT RIM 11
CRASH1 HEAD 12
CRASH1 RIM 13
CRASH2 HEAD 14
CRASH2 RIM 15
RIDE HEAD 16
RIDE EDGE 17
RIDE BELL 18
AUX1 HEAD 19
AUX1 RIM 20
AUX2 HEAD 21
AUX2 RIM 22
AUX3 HEAD 23
AUX3 RIM 24
[KitPad]
KICK 1
SNARE 2
TOM1 3
TOM2 4
TOM3 5
HI-HAT 6
CRASH1 7
CRASH2 8
RIDE 9
AUX1 10

Other manuals for Roland TD-27

Related product manuals