EasyManua.ls Logo

Roland TR-808 User Manual

Roland TR-808
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Model 8-448 ver. 3.30
OWNER’S MANUAL
© 2015 CHD Elektroserv is

Other manuals for Roland TR-808

Question and Answer IconNeed help?

Do you have a question about the Roland TR-808 and is the answer not in the manual?

Roland TR-808 Specifications

General IconGeneral
TypeAnalog Drum Machine
Release Year1980
Sound GenerationAnalog Synthesis
Number of Sounds16
SequencerYes
MIDINo
Memory32 Patterns
Number of Tracks1
Tempo Range40-240 BPM
OutputsIndividual Outputs for Each Sound
ControlsVolume
Power SupplyAC Adaptor
InputsExternal trigger input

Summary

MIDI Interface Description and Connection

2.1. Connection of TR-808 to DIN-SYNC Bus

Explains connecting TR-808 to DIN-SYNC bus using a 5-pin DIN connector and slide switch.

2.2. Connection of TR-808 to MIDI Bus

Details connecting TR-808 to MIDI bus using a special MIDI cable and a 7-pin connector.

TR-808 Operation and Parameters

3.1. Operation Modes Selection

Describes selecting TR-808 operation modes via the SYNC slide switch (INPUT, OUTPUT, MIDI).

3.2. Operation Modes Indication

Explains the LED indicator under the START/STOP button for MIDI operation mode and command reception.

3.3.1. "MIDI Channel" Parameter

Selects MIDI channel for data receiving; default is channel 10.

3.3.2. "Default Program Nr." Parameter

Specifies the program number set as active after interface reset; default is program 1.

3.3.3. "MIDI Msg Indicator" Parameter

Enables or disables the indication of received MIDI data via the LED indicator.

3.3.4. "DAC Calibration" Parameter

Calibrates amplitude of trigger pulses for TR-808 sound generators for correct launch.

3.3.5. "LED Brightness" Parameter

Sets the brightness level of the LED indicator installed under the START/STOP button.

MIDI Implementation Details

4.1. Channel MIDI Messages

Explains that the interface accepts only "Note On" and "Program Change" MIDI commands.

4.1.1. Note-On Commands

Details accepted MIDI note numbers (0-120) and their assignment to TR-808 sound generators.

4.1.2. Program (Patch) Change Commands

Explains how Program Change commands control synchronization and sound generator launching.

4.2. Common System Messages

Details the use of "MIDI Clock", "Start", "Stop", and "Continue" for sequencer control.

4.3. System Exclusive Messages

Explains how SysEx messages are used for remote control, parameter changes, and map definitions.

Appendices

A. Warranty Conditions

Outlines the thirty-month warranty terms and conditions for the equipment.

B. Error Indication

Explains how the LED indicator shows error status and lists error codes and descriptions.

C. Drum Sets of C/M, GM, GS and XG Standards

Lists drum sound assignments for various MIDI standards (C/M, GM, GS, XG) by note number.

D. MIDI Implementation Chart

Provides a detailed chart of MIDI functions, transmission, reception, and remarks.

E. FAQ & Troubleshooting

Offers solutions to common problems and frequently asked questions regarding the interface.

Related product manuals