Roland TR-808 - Page 2

C Receive channel 1 [ Bottom C ] MIDI note number 36
Db " " 2
D " " 3
Eb " " 4
E " " 5
F " " 6
Gb " " 7
G " " 8 Selecting a receive channel
Ab " " 9 will automatically put the
A " " 10 MIDI into omni off mode.
Bb " " 11 That is, it will receive on
B " " 12 the selected channel only.
C " " 13
Db " " 14
D " " 15
Eb " " 16
E Omni on mode
F Transmit channel 1
Gb " " 2 The transmit channel can be
G " " 3 changed independently of the
Ab " " 4 of the receive channel, and
A " " 5 can be set even during omni
Bb " " 6 on mode.
B " " 7
C " " 8 [ Middle C ] MIDI note number 60
Db " " 9
D " " 10 default
Eb " " 11
E " " 12
F " " 13
Gb " " 14
G " " 15
Ab " " 16
A Not Used - - -
Bb " "
B " "
C " "
Db " "
D " "
Eb " "
E " "
F " "
Gb " "
G " "
Ab " "
A " "
Bb " "
B " "
C " "
Db " "
D Continue message ignored
Eb Continue treated as Start not true continue (default)
E Disable start and stop through MIDI (both In and Out)
F Enable start and stop through MIDI (default)
Gb Set mode 1 velocity sensitive receive mode (default)
G Set mode 0 two level receive (normal/accent)
Ab " "
A " "
Bb " "
B " "
C ENTER key Press and release. [ Top C ] MIDI note no. 96