NQPSMTR
Supplemental Notes
© 1997 Roland Corporation U.S. Re-initialization Procedures Page 3 of 9
FC-100mkII Power on while holding pedals #1, #2, and #8.
FC-200 Power on while holding the #10 pedal, then press the CTL pedal.
FG-10 Power on while holding CLEAR and EXIT.
FG-1000 Power on while holding CLEAR and EXIT.
FP-1 The unit resets each time you turn it on.
FP-8 Press FUNC and release. While holding PIANO, press FUNC again.
G-800 Power on while holding WRITE.
GC-8 No ROM reset.
GI-10 Power on while holding PARAMETER + and -, then press VALUE +.
GM-70 Poly Mode: Power on while holding PLAY, GENERAL EDIT, and IND EDIT.
Mono Mode: Power on while holding TUNE, CONTROL ASSIGN, and DATA TRANSFER.
GP-8 No ROM reset.
GP-16 Power on while holding the #6, #7, and #8 buttons. Use the FUNCTION LEFT (<) and
RIGHT (>) buttons to select “2.All Factory Preset,” then press WRITE three times.
GP-100 Power on while pressing in the PARAMETER knob, then press WRITE.
GR-09 Power on while holding Pedal #2, then press the VALUE + button. Now press EDIT/PLAY.
GR-1 Power on while holding WRITE/COPY, then press YES.
GR-30 Power on while holding Pedal #2, then press the PATCH+ button to select INI. Press
EDIT/PLAY. Then press PATCH+ and PATCH- simultaneously.
All Other GR No ROM reset.
GS-6 No ROM reset.
GT-5 Power on while holding MOD and FEEDBACKER/SLOW GEAR. Press WRITE.
GX-700 Press TUNER/UTILITY. Use PARAMETER LEFT (<) and RIGHT (>) buttons to select
FACT INIT. Cursor to left and dial SYSTEM, then right and dial P#100. Press WRITE,
then TUNER/UTILITY.
HP-100 (Same as PIANO PLUS-100.) No ROM reset.
HP-130
HP-300 (Same as PIANO PLUS-300.) No ROM reset.
HP-400 (Same as PIANO PLUS-400.) No ROM reset.
All Other HP (Some also the same as PIANO PLUS-Series.) The unit resets each time you turn it on.
HS-Series No ROM reset.
JD-800 Press DATA TRANSFER. Use PAGE UP (^) and DOWN (v) to select FACTORY
PRESET. Press YES.
JD-990 While holding EXIT, press UTILITY. Press F6 (EXECUTE), then F5 (YES).
JP-6 (Same as JUPITER-6.) No ROM reset.
JP-8 (Same as JUPITER-8.) No ROM reset.
JP-8000 While holding SHIFT, press INIT/UTIL. Press INIT/UTIL repeatedly to select INITIALIZE
WRITE. Use the DOWN/UP buttons to select FACTORY PRESET, then press WRITE.
JS-30 Power on while holding RECORD located in the SEQUENCER section.
JUNO-1 (Same as ALPHA JUNO-1.) No ROM reset.
To Next Page
Loading...
