Roland V-Mixer VM-3100 - Recording Process and Scene Saving

Try Recording the Demo Tape
1
Wm © ND
When all the instrument and mic levels are adjusted, record to the tape.
Recalling a SCENE MEMORY for the first song.
Press the SCENE1 button to recall the contents of the SCENE.
Record
Press the recording deck’s start button, and begin recording.
Start the performance
Stop recording.
When the performance is done, stop recording. When you are ready to
continue, call up the SCENE MEMORY containing the mix prepared for
the second song, then record.
Your entire demo tape can be completed in the same fashion.
Being able to immediately call up mix settings with SCENE MEMORY
also makes it convenient for overdubbing and redoing recordings.
POSSESSES SEHSSSEHEHSSSSHSOSOSSSHSHSSSSHSSSSSSSSSSSHSSOHSSCSHSHOHSSOSSSSSSSSSSESSESHSEHOSCSOHESSCEEE
To Cancel a SCENE MEMORY That Has Been Called Up
If you've mistakenly called up a SCENE MEMORY you didn’t really
want, you can restore the status that existed before the SCENE was
called up by using the Undo function.
“Undo Hold down the [SHIFT] button and press [EXIT/NO].
‘aTINO
+ ==> The SCENE that was
Ca fal called up is cancelled.
Furthermore, if you want to retract the Undo, carry out the Redo
function.
*Redo Hold down the [SHIFT] button and press [ENTER/YES].
(ar; ENTERSYES,
+ EC = The SCENE that was
Cl undone is reinstated.
PHSCSHSOSSSS HS SESH SSHSHOSSH SSS SSHSSSESSESEHHOSHSOSSESHSSSSHSSSSESSSSOHSSSESHSSSSSSSHSHHSSESEHOE
34