Roland DJ-808 - User Manual

Other manuals for Roland DJ-808

Startup Guide12 pages

Questions and Answers

R
Raymond GoodmanAug 16, 2025
Why is there no sound coming from my Roland DJ-808, or why is the volume too low?
- S
  Susan CollinsAug 16, 2025
  If your Roland DJ Equipment isn't producing sound or the volume is too low, make sure the [TRIM] knob, channel fader, cross fader, [TR/SAMPLER] level fader, and [MASTER LEVEL] knob are correctly positioned. Also, verify that the [INPUT SELECT] switch is set appropriately for your input source, and that your powered speakers or amp are properly connected and their volume is correctly set.
M
Michelle HillAug 18, 2025
What to do if the sound is distorted on my Roland DJ-808?
- B
  Brandi JohnsonAug 18, 2025
  If the sound from your Roland DJ Equipment is distorted, adjust the [TRIM] knob, ensuring the channel level indicator's OVER segment doesn't light up. Also, adjust the [MASTER LEVEL] knob so that the master level indicator’s OVER segment remains unlit.
B
burnsjasonAug 22, 2025
How to fix a Roland DJ-808 DJ Equipment that does not turn on?
- J
  Jennifer JonesAug 22, 2025
  If your Roland DJ Equipment isn't powering on, ensure the AC adapter is properly connected to both the AC outlet and the rear panel power connector on the DJ-808. Also, check that the adapter itself and the AC power cord are securely connected.
H
hicksderekAug 25, 2025
What to do if my Roland DJ Equipment is not recognized by my computer?
- L
  Laura HallAug 26, 2025
  If your Roland DJ Equipment isn't being recognized, ensure the USB cable is correctly connected directly to your computer, not through a USB hub. If the issue persists, try uninstalling and then reinstalling the USB driver.
A
Amanda ParkerAug 28, 2025
Why is Serato DJ not starting when I connect my Roland DJ-808 DJ Equipment?
- J
  Jessica NelsonAug 28, 2025
  If Serato DJ isn't starting with your Roland DJ Equipment, first try uninstalling and then reinstalling Serato DJ. If the problem continues, create a new user account with administrative privileges, then install the USB driver and Serato DJ within that new account.
M
Megan CollinsAug 30, 2025
How to fix Roland DJ Equipment when the mic sound is not output?
- L
  Lawrence VangAug 31, 2025
  If the mic sound is not being output from your Roland DJ Equipment, check that the mic switch in the VT section is set to ON or DUCK. Also, ensure that the [LEVEL] knob in the VT section is set to an appropriate level.
M
Melissa BerrySep 3, 2025
How to use pitch play on Roland DJ-808?
- J
  Jessica RobinsonSep 3, 2025
  To use pitch play on your Roland DJ Equipment, you must activate Pitch’n Time DJ. Enter the voucher code (listed on the card) following the procedure given on the included Serato DJ EXPANSION PACK VOUCHER card.
L
Lisa MccoySep 5, 2025
What to do if the jog dial does not respond on my Roland DJ Equipment?
- J
  Jennifer HallSep 6, 2025
  If the jog dial on your Roland DJ Equipment isn't responding, make sure both the jog dial and your hand are clean.
T
Teresa DelacruzSep 9, 2025
How to use Saved Flip on Roland DJ-808?
- A
  Adam DennisSep 9, 2025
  In order to use Saved Flip mode on your Roland DJ Equipment, you must separately purchase the Serato Flip Expansion Pack and activate Serato Flip.
R
Rebecca HarrellSep 12, 2025
How to enable DVS control on Roland DJ-808 DJ Equipment?
- D
  denisewalkerSep 12, 2025
  In order to use DVS control on your Roland DJ Equipment, you must separately purchase the Serato DVS Expansion Pack and activate Serato DVS Expansion.