Roland VG-99 Training Guide
Page 4
3. Press F3.
4. Press PAGE RIGHT once.
5. Press F1 or turn the F1 knob to select the type of divided pickup you are
using: GK-3, piezo, etc.
6. Press F2 or turn the F2 knob to select ST if you are using a Strat or LP if
you are using a guitar with a Gibson scale.
7. Press PAGE RIGHT to select PAGE 4: SYSTEM GK SETTING.
You will see this screen:
8. Set the Input Sensitivity:
a. Play an open string hard. You will see a row of LEDs light up in the
display.
b. Use the corresponding Function knob to adjust the sensitivity of the
string so that all the LCD’s light only on the very hardest note.
c. Repeat for the other five strings.
d. When you are finished, Press EXIT.
To Next Page
Loading...
