EasyManua.ls Logo

Roland VH-12 V-Hi-Hat - Playing Methods and Specifications; Playing Methods; Technical Specifications; Compatible Stand Information

Roland VH-12 V-Hi-Hat
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Playing Methods
The hi-hat tone changes smoothly and continuously from
open to closed in response to how far the pedal is pressed.
You can also play the foot closed sound (playing the hi-hat
with the pedal completely pressed down) and foot splash
sound (playing the hi-hat with the pedal fully pressed and
then instantly opening it).
When you strike the hi-hat while pressing on the pedal with
the hi-hat closed, you can then change the closed tone in
response to the pressure you place on the pedal.
This playing method involves striking the middle area of the
top hi-hat. It corresponds to the sound of the “head-side” of
the connected trigger input.
fig.Play-01
This playing method involves striking the edge of the top hi-
hat with the shoulder of the stick. When played as shown in
the figure, the “rim-side” sound of the connected trigger input
is triggered.
fig.Play-02
Do not strike the bottom hi-hat or the underside of the
top hi-hat.
Open/Closed
Pressure
Bow Shot
Edge Shot
Edge Sensor
Specifications
Size: 12 inches
Trigger: 2 (Bow/Edge)
Connectors: TRIGGER OUTPUT Jack
CONTROL OUTPUT Jack
Dimensions: 314 (W) x 314 (D) x 89 (H) mm
12-3/8 (W) x 12-3/8 (D) x 3-9/16 (H) inches
Weight: 1.9 kg / 4 lbs 4 oz
Options Owner’s Manual, Clutch, Clamp,
Holder (3 types), Link Cable,
Tuning Key, Cable Tie
962a
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.
Compatible Stand
Diameter: 6.0–7.0 mm
(0.236"–0.276")
Diameter: 11.7 mm (1/2") Max.
Diameter: 25.4 mm (1")
22.2 mm (7/8")
19.1 mm (3/4")
VH-12_e 10 ページ 2005年2月3日 木曜日 午後6時29分

Related product manuals