Roland VR-700 - V-LINK Settings; Deleting Favorite Sets, Formatting USB Memory, Initializing the System

60
Various Settings (Function mode)
With the Group already selected, press the [+] button or [–] button until
is shown in the display.
* Settings for the following parameters are saved in system memory. After editing these, press the [WRITE] button to save the settings in
system memory (p. 51).
* The shaded parameters are stored in system memory.
With the Group already selected, press the [+] button or [–] button until is shown in the display.
V-LINK Settings
Button
Parameter Value Factory setting
[PIANO]
Transmit Channel 1–16 10
Deleting Favorite Sets, Formatting USB Memory, Initializing the System
Button
Parameter Operation
[PIANO]
Delete Favorite
Delete a favorite backup from USB memory
p. 61
[E.PIANO]
Format
Format USB memory
p. 62
[STRINGS]
Factory Reset
Initialize the VR-700’s internal memory to the factory-set state
p. 26
VR-700_e.book 60 ページ ２００９年１１月１８日 水曜日 午前９時２４分