37
Algorithm List
2ch RSS
Gives each of the sounds input into the respective channels three-dimensional locations.
fig.08-16
• Input A is input into the L-channel side of the effect. Therefore, it is required to insert and connect “Lch” of the effect to the channel handling Input A.
Similarly, Input B is input into the R-channel side of the effect. Insert and connect “Rch” of the effect to the channel handling Input B.
• Do not output the direct sound.
Parameter (full name) Setting Function
RSS: Gives sounds three-dimensional locations.
Azimuth -180–180˚ Sets output directions, front, back, right and left, for the Input A channel.
Elevation -90–90˚ Sets output directions, up and down, for the Input A channel.
Type A Same effects can be achieved as the old VS series (VS-880/880EX/890/1680/1880/1824/1824CD/
VSR-880).
B More distinctive effects can be achieved than Type A.
Phones Off, On Set to On when you use headphones.
Set to Off when you use speakers.
Input A
Input B
Output L
Output R
RSS
RSS
What is RSS?
It stands for Roland Sound Space. This is one of the Roland’s proprietary effect technologies that enables three-dimensional
location of the sound source on the ordinary stereo system. Not only control on effect for the front and the sides of the
audience, this technology provides controls on directions (azimuth) such as up, down and rear as well as control on distance
to localize the sound source.
fig.08-17e
Front
Right
Left
Back
Up
Down
0°
Elevation
Azimus
VS-2000_e.book 37 ページ 2005年12月12日 月曜日 午後4時54分