Recording to the VS-880EX
1. Make the connections as shown below.
2. Follow the procedure as described in “Settings for the VS-880EX” (p. 195)
and “Settings for Cakewalk Pro Audio” (p. 196), set up the system so that the
VS-880EX and Cakewalk are synchronized.
3. Make the settings to Cakewalk as shown below. For more detailed informa-
tion, please refer to your Cakewalk owner’s manual.
Settings | Audio Options... | Advanced | SMPTE/MTC Sync: “High-Quality”
* If your computer does not feature adequate performance, even with the above set-
tings, you may not be able to get stable digital audio output, meaning the sound will
suffer when digital connections are used. Additionally, Cakewalk Pro Audio 5.0 and
Cakewalk Professional 5.0 do not feature the above-mentioned settings. We recom-
mend upgrading to Version 6.0.
4. Press [SYSTEM] several times until “SYS System PRM?” appears in the dis-
play.
5. Press [YES].
6. Press PARAMETER [ ] several times until “SYS MasterClk=” appears in
the display.
7. Rotate the TIME/VALUE dial.
To Next Page
Loading...
