Input Mixer
Input mixer is placed before the recorder section, and correspond to the external
input sources (INPUT 1–6, DIGITAL IN L/R).
The output of each channel is assigned to tracks to be recorded. Channels not
assigned to tracks are output directly from the MASTER jacks. Additionally, the
status of tracks with signals assigned to them when not in record standby (STA-
TUS indicator blinking red), also are output from the MASTER jacks. At this
time, the following signals are assigned to the channel faders.
Channels 1–6: INPUT jacks 1–6
Channels 7–8: DIGITAL IN connector L/R
To Next Page
Loading...
Need help?
General
