114
VS-880 Application Guide
Vari-Speed Functions in Scrub Mode
• You can use Vari-Speed while operating in the Scrub Preview mode to alter the pitch of the
preview playback.
Keep Original Tracks When Bouncing
• Use Virtual Tracks to keep your original vocals or guitars after bouncing them.
• Use a Scene to store the exact levels and effects for later remixing if necessary.
Use the Correct Scrub Direction
• Scrub up TO the beginning of a transient sound or phrase.
• Scrub FROM to find the End of a phrase.
Use a Longer Scrub Preview Length.
Use a longer length Scrub Preview for some sounds.
• Sometimes it is useful to use a longer Scrub Preview length. For example, a vocal note may
be easier to find using the maximum length of scrub preview - 100 ms.
Change Track Status Quickly
• Press [STOP] + [STATUS] buttons to select Play mode.
• Press [REC] + [STATUS] buttons to select Record Ready mode.
Use Locators For Editing Functions
Using the same numbers consistently will speed up your work.
• 1=Start
• 2=From
• 3=End
• 4=To
Use [NUMERICS] for Precise Time Code or Measure Location
Record First Using the Metronome
• Set up a tempo map first and then record with internal metronome click and/or external
MIDI gear. This provides you the easiest and fastest way to edit by bars and beats.
Display Shows Scrub or Preview Type
• When you are using SCRUB or PREVIEW, a blinking horizontal bar at the bottom of the LCD
screen on either side of the center “now” line indicates Preview From or Preview To.
To Next Page
Loading...
