94
VS-880 Application Guide
Mixing your 8 VS-880 tracks to stereo DAT digitally is exactly the same as recording to a stereo analog
recorder. Remember that the master analog outputs and the digital output from the VS-880 contain exactly
the same information.
ACTION: Mix 8 Tracks To Stereo DAT - Digitally
1. Make sure that the VS-880 mixer is set to INPUT>TRACK mode (hold [SHIFT] and press
[SELECT] if it is not).
2. Connect the DIGITAL OUT of the VS-880 to the digital input of your DAT recorder.
3. Make sure that your DAT machine is set to record from it’s digital input (S/P DIF).
4. Make sure that the sampling rate of your DAT recorder matches the sampling rate of the
current song in the VS-880 (some DAT recorders will do this automatically).
Press the [PLAY (DISPLAY)] button, then press [SHIFT] + [SONG] to display the
sampling rate of the current song.
5. Set the panning and level to desired position for each track on the VS-880.
6. Start recording on your DAT machine.
7. Press [ZERO] on the VS-880.
8. Press [PLAY] on the VS-880. Use the FADERS and PAN knobs to make any real time
adjustments.
9. Press [STOP] on the VS-880 and your DAT machine when the song is finished.
Mix 8 Tracks To Stereo DAT - Digitally
To Next Page
Loading...
