52
VS-880 Application Guide
(Record A Guitar On Tr. 1, Record The Effects On Tr. 2, Continued)
20. Press the [SELECT] button under MIXER MODE to select TRACK MIX.
21. Raise the FADERS on Channels 1 and 2 all the way up, then all the way down in order to
cross the null point.
22. Raise the FADER on either Channel 1 or 2 to monitor what you play. Channel 1 will be the
‘dry’ guitar and channel 2 will be the ‘wet’ guitar.
Faders 1 and 2 WILL affect the Recording level.
23. Press the [STATUS] button of channel 1 and channel 2 so both LEDs flash red (record ready
mode).
24. Press [REC] and [PLAY] and begin recording.
To Next Page
Loading...
